Request a quote
Kasco® de-icers are an important part of winterizing your lake or pond. They are designed to be suspended from a dock or boat, or attached to an optional horizontal float or universal dock mount (sold separately). Mounted either vertically or horizontally, the de-icer circulates water to the surface, causing turbulence that reduces or eliminates ice formation.
The motor assembly on a Kasco de-icer is sealed in an oil bath for long life and has ball bearings for smooth operation. The guard and motor case are made of stainless steel. Each unit includes a motor, propeller, two 20' suspension ropes, a guard assembly, zinc anode, and low-temperature-rated power cable. They are ETL-approved to UL standards and include a two-year warranty.
Kasco De-Icer Accessory Options
Thermostat Control is an economical way to control the operation of your de-icers. This accessory uses air temperature only to turn the de-icer on when the temperature drops below as set point that you decide. One C10 Control will control one 120V Kasco de-icer.
Time and Temperature Control is designed for maximum energy conservation. This accessory controls how long the de-icer will operate when temperatures demand it. By using both time and temperature features, you can save power by only having the equipment running while it is cold enough and in set time intervals. One C20 Control will control one 120V Kasco de-icer.
The Universal Dock Mount allows the Kasco de-icer to be mounted in a vertical position or at several other angles. The de-icer can be adjusted to a maximum depth of 10' from the above water mounting brackets and can be moved 360°. This mount is ideal for marina applications, gas piers, wharfs, water towers, water storage areas, or areas where rope suspension is not an option, such as pilings or where boat traffic may interfere with the ropes.
An Industrial Dock Mount has all the same operating features of the Universal Dock Mount but is constructed of heavier, stronger components including stainless steel. It also allows for the option of longer than a 10' pipe for deeper de-icer applications.
The Horizontal Float Kit allows a Kasco de-icer to produce an elongated pattern of agitated water. This type of mount is well suited for shallow water or where water and ice levels may fluctuate, like tidal waters, or where elongated open water areas are desired, such as around long docks. The unit is mounted horizontally to the surface of the water, just below the flotation block. The de-icer can be angled in several positions, including horizontal and above and below horizontal.
Questions? Ask us.