3" PVC/EPDM Type-21 Threaded Ball Valve

ASAHI/AMERICA® TYPE-21 BALL VALVE

• Pressure rated up to 230 psi (PVC, CPVC, PVDF)

• Double O-ring seals on stem for added protection

• Full bore, sizes 1/2"–2"

• Full vacuum rated, all sizes

• Blocks in two directions, upstream and downstream, leaving full pressure on the opposite end of the valve

• Integrally molded ISO mounting pad for both manual and actuated operations

• Integrally molded base pad to mount valves securely or panel mounting

• PTFE seats with elastomeric backing cushions ensure bubble-tight shut-off and a low fixed torque, while at the same time compensating for wear

• True Union design for easier installation or repairs without expanding the pipe system

• Built-in spanner wrench on the handle for valve disassembly and assembly

• Two sets of end connectors (socket and threaded) included with all PVC and CPVC valves in sizes 1/2"–2"

• CPVC threaded end connectors on sizes 1/2"–1" come with stainless steel reinforcing rings

• New PTFE Seat design—Facilitates easier field maintenance if required

• Tapered O-ring groove—Helps to Keep the end connector O-rings on the valve body during installation

• Body Flats—Flats have been added to either side of the valve body where a wrench can be applied to prevent the valve body from turning when the Union Nuts are tightened