Heat Cool Pumps
Starting at $0.00
Titan Air Cooled Heat Pumps by Aqua Logic® are designed for a wide range of applications such as a public aquarium, aquaculture facility, government or university research institution or hydroponics operation.
Titan Air Cooled Heat Pumps by Aqua Logic®. All units are suitable for outdoor installation (but should be protected from direct weather). Heat pumps up to 5hp have a ”Spine Fin” condenser coil.
In the cooling mode, the heat pump works as a chiller, cooling water to the temperature you select. In the heating mode, the heat pump works with the liquid refrigerant (Freon) flow in reverse. Freon absorbs heat from the air as it moves through the condenser. As it heats, the Freon becomes a gas, which is then compressed by the compressor. The heat carried by the Freon is then released into the titanium heat exchanger and transferred into the circulated water.
These models feature titanium helix coils and powder-coated shrouds. 2” PVC slip, in and out fittings on 2–10 hp; 3” PVC slip on larger units. 230V models listed; 460V also available. Dual stage digital temperature controller enclosure with 3 push button programming and will maintain water temperatures in the range from 40°-85°F (4 to 29°C); you must specify desired temperature operating range when ordering. Units will lose heating efficiency when air temperature is under 40°F (4°C). Note min/max flow requirements (water pump not included). The controller can display in either °F or °C and will maintain the water within 1 degree of the set point.
Water pressure should not exceed 40 psi. Allow a 4-week build time. Ship from factory via motor freight. One-year limited warranty. Excluded from free shipping policy FOB manufacture.
• Heat or Chill with one unit
• Titanium Heat Exchanger
• Fresh or Saltwater use
• Dual Stage Temperature Controller