Request a quote
Freshwater and saltwater compatible
All Jacuzzi® Magnum pumps have a no-tool access to the strainer and impeller areas. Ring-Loc design allows you to remove the motor or service the included strainer basket in seconds without tools and without disconnecting your plumbing! Purchase the "MK" motor kit (pre-assembled motor, power cord, impeller and seals; 3/4 to 2 hp only) and your system will be back up and running in fewer than 5 minutes in the event of a motor failure. These pumps have oversize, low-service factor motors to save money on your electric bill. NSF-, UL- and CSA-certified.
These pumps are loaded with features: a large strainer basket with a clear cover, drain plugs, self-priming to 10', energy-saver motors, built-in check valve flap and they can even run dry without damage! The manufacturer does not rate them for saltwater, but we find that they hold up very well and, with the quick-change feature, you can probably go several years in salt water, then change the motor assembly.
2" FNPT inlet/outlet on the 3/4 to 3 hp and 2" PVC slip adapter-unions are included. Force 3 series have 3" FNPT inlet/outlet. Three-phase pumps must be wired by an electrician. One-year warranty.
Replacement motors ("M" series) are the electric motor only. Order a seal kit or use the old one; then swap your seal, impeller and power cord from the old motor and install them on the replacement. No need to disconnect piping, thanks to the Ring-Loc design.
MF Perfomance Curves
MAG Performance Curves
We highly recommend using protective devices with all 3-phase equipment. Motor starters, phase monitors and phase protectors are not included in the sale and should be sourced locally. Failure to install protective devices will void most warranties. We also recommend that a certified electrician perform the installation.