Request a quote

Request a quote


* Required Fields

Oxygen Saturators PART #: OY10 to 0Y400

Oxygen Saturators

In 1989, we developed the 3-part oxygen saturator, which performs like an oxygen cone, but with these added benefits:

• Comes apart for cleaning.
• Has a smaller footprint.
• Top half bolts inside the bottom half for Ground shipment (small units).

Like the oxygen cones, our saturators feature 100 percent oxygen absorbing capability. The water and oxygen enter the top of the column, where agitation and shear occurs. As the water and oxygen move downward, their velocity is reduced by the increasing diameters. This allows time and space for any oxygen bubbles that have not dissolved to float. No bubbles escape from the saturator. These saturators are made of thick, high-density, black, linear polyethylene with fusion-bonded flanges, except OY35P, which is a low-priced PVC model that features two clear sections so the bubbles can be observed.

Availability: In stock

ModelGPMCenter Flange SizeRecommended Flow MeterHeightInlet/Outlet Price Qty
OY18 15–253"MFR41062"3/4" MNPT
OY35 35–654"MFR41086"1 1/4" MNPT
OY35P 35–656"MFR41088"1 1/4" MNPT
OY75 65–906"MFR44090"1 1/2" MNPT
Model OY18 OY35 OY35P OY75
Center Flange Size3"4"6"6"
Recommended Flow MeterMFR410MFR410MFR410MFR440
Inlet/Outlet3/4" MNPT1 1/4" MNPT1 1/4" MNPT1 1/2" MNPT